Subaru Replacement Keys: 11 Thing You re Forgetting To Do

how to program subaru key fob to Get a New Key for Subaru

You can lock and unlock your Subaru at the touch of a button if it has key fob. However, if your key fob is lost in the ocean or gets a bath in the washer you might be trying to figure out how to get it back in working order.

Fortunately, our Stocker Subaru dealership has a few suggestions to help you. First, you'll want to access your key fob and locate the circuit board for the transmitter inside.

How can I get a brand new key

It's a lot easier than you think to obtain a new Subaru key. It is possible to purchase a new key from the dealership, an automotive locksmith or even online. The cost varies depending on where you get the key and whether it needs to be programmed. It also depends on the type of key you have (transponder smart fob, smart fob push to start or regular non-transponder).

If you're in search of a new key for your vehicle, it's best to contact an auto locksmith that specializes in Subaru cars. They'll know all about the unique key fobs as well as the specific programming that they use. You can determine what type of key you own by taking a look at the sticker on your car's windshield.

Some keys have Remote Start features which allow you to start your car from the comforts of your home. However, you'll need to have the vehicle's VIN number that is located on the label that is located in the driver's door or in the owner's manual.

The majority of Subaru models built after 2000 feature a transponder-style key that deactivates the engine computer. The keys aren't able to be duplicated with the same machines used to cut traditional metal keys, so you'll need visit a locksmith dealer for replacements. A new key is typically priced between $50-$250, based on the type of model and the features.

How do I obtain a replacement key

There are several options to obtain an additional key for your Subaru Immobilizer Key Programming according to the kind of car you own (chip intelligent fob, chip "push to start" remote, or a regular key made of metal). You can contact the dealership that you bought the car from for a replacement, or an automotive locksmith who has the required equipment to make these types of keys, or order one online. If you receive a brand new replacement key from the dealer you can be sure that it is going to work with your vehicle and is covered by warranty and will include the correct programming for your specific model.

The dealer will require the codes for the car you bought to make a chip key. This can only be done by the dealer from whom you purchased your vehicle. This could be a hassle because you'll have to bring your car to the dealer or have a locksmith visit and code the key.

A simple key made of metal is not required to be coded and can be duplicated by many locksmiths or hardware stores that offer a variety of keys that are blank. You'll need a key made of metal or flathead screwdriver in order to open tiny tabs at top of the key fob, and remove the battery. Replace the old battery with an CR2032 coin cell, and snap the encasement back together.

How to get an electronic key fob

A key fob is a remote device that lets you to control the electrical systems. They can unlock your car, start it or lock it, set alarms and more. If your Subaru key fob isn't functioning correctly, you may have to replace it. It is important to get the right type of fob for your vehicle. Consumer Reports says that off-brand fobs could cause issues with the immobilizer system in your vehicle.

If you have a newer Subaru is likely that it has a smart key system. These require special programming in order to work with your vehicle. This is best handled by your dealership and the cost may be covered by your warranty or roadside assistance program.

Older subaru new key fob cost models use a standard metal key, which can be duplicated at a local hardware store or locksmith. You can also buy blanks from online retailers who sell Subaru key chains with Subaru logos.

You can repair the problem with the battery on your older Subaru at home without having to visit an expert mechanic or pay for a key-duplication service. Find a small crevice in the seam that separates the front and back of the fob. Make use of a flathead to pull away the two halves. You'll find a flat battery inside. Replace the battery with a new 2025 model and ensure that the correct side faces up. Place the key in the slot, and snap it together.

How do I replace a key fob

In the past, people would purchase a cheap keyfob at an hardware store or online and then take it to a dealership or locksmith to get it programmed and cut. While this is still a possibility but it's best to directly contact the dealer to avoid the risk of having the key copied and to ensure that the new key fob is correctly programmed for the vehicle you own. This is particularly crucial if you own an older model that requires specialized programming, such as the ones that come with features such as auto-parking and window rolling.

While these keys add to the convenience of driving your subaru key fob upgrade in Gilroy however, they can be a pain when they stop functioning. Fortunately, replacing the battery in your key fob is easy, and you can even do it yourself if you are familiar with the procedure.

Begin by locating the small space in the seam that separates the front and back of your fob. Use the tips of a metal key or a screwdriver with a flat head to open the fob and then look for the flat-round battery inside. Pull out the old battery and then place a brand new 2032 battery into its place, making sure it's facing the same way as the first one. After that, put your device back together.

In the future the keys to your car may be replaced by "smart" keys that come with more capabilities. However, for now you will be able to enjoy all of the benefits of your subaru key car's key fob, including the ability to reduce your windows while keeping your engine running.